Archives: Courses

Example Course

This Course is Under Development:

This course will be designed for roles such as X and Y.

This Course will cover:

  • The requirements of work

The purpose of this course is to inform employees about work and X and Y.

RELEASE DATE:

The release date for this course is the 30th of February 1953 .

SAFETY ALERT: Eye & Face Protection

Which job roles is this information for:

This notice is for all Service Departments, Depot Managers and appropriate Workshop Staff.

This Alert will cover:

  • The requirements of Eye & Face Protection

The purpose of this Safety Alert is to tell you what you must do to protect your eyes and face in our workplace.

Completion

Once you have completed the Alert Information, you will be issued with a certificate.

The certificate will be issued by Inspire International UK Ltd, the UK’s leading health and safety management company focusing on vehicle workshop safety.

The certificate will clearly show your name; your company name and name of the course taken.

SAFETY ALERT: Eye & Face Protection – Keltruck

Which job roles is this information for:

This notice is for all Keltruck Service Departments, Depot Managers and appropriate Workshop Staff.

This Alert will cover:

  • The requirements of Eye & Face Protection

The purpose of this Safety Alert is to tell you what you must do to protect your eyes and face in our workplace.

Completion

Once you have completed the Alert Information, you will be issued with a certificate.

The certificate will be issued by Inspire International UK Ltd, the UK’s leading health and safety management company focusing on vehicle workshop safety.

The certificate will clearly show your name; your company name and name of the course taken.

Hand Arm Vibration Syndrome – H.A.V.S

Approximate length:

27 minutes

Which job roles is this course for:

This course is for any staff that uses Handheld Vibrating Equipment

About this course:

Anyone using Handheld vibrating Equipment has a responsibility to have a working understanding of the dangers of Hand Arm Vibration Syndrome (HAVS), including how HAVS is caused and how it can be prevented.

This e-learning module will cover:

  • Understanding HAVS and its effects,
  • The legal responsibilities of the employer and the employee,
  • Calculating your daily exposures,
  • Putting Control Measures in place,
  • Health Surveillance

Learning Outcomes

  • This course is to provide delegates with a working understanding of the dangers and ways to prevent Hand Arm Vibration Syndrome (HAVS).

Course Completion

At then end of this course you will be required to complete a multiple choice assessment based on the information provided and what you have learned.

Delegates will need to pass the assessment within this course to ensure successful completion. The pass mark is 70%.

You will have a maximum of 3 attempts to reach the required pass mark. You can revisit the course content if you need to before attempting the assessment again.

Once the assessment has been passed, you will be issued with a certificate.

The certificate will be issued by Inspire International UK Ltd, the UK’s leading health and safety management company focusing on vehicle workshop safety. The certificate will clearly show your name; your company name; name of course taken; pass percentage; expiry date and any applicable course accreditation marks.

SAFETY ALERT: Eye & Face Protection – DISABLED

Which job roles is this information for:

This notice is for all Keltruck Service Departments, Depot Managers and appropriate Workshop Staff.

This Alert will cover:

  • The requirements of Eye & Face Protection

The purpose of this Safety Alert is to tell you what you must do to protect your eyes and face in our workplace.

Completion

Once you have completed the Alert Information, you will be issued with a certificate.

The certificate will be issued by Inspire International UK Ltd, the UK’s leading health and safety management company focusing on vehicle workshop safety.

The certificate will clearly show your name; your company name and name of the course taken.

Working at a Customer Site for Commercial Vehicles Technicians

Approximate length:

20 Minutes

Which job roles is this information for:

This training is for any staff that carry out work at Customer Sites.

About this course:

This E-Learning training covers the key areas of Health and Safety that employees are legally required to be trained in when carrying out work at Customer Sites.

This course has been developed using HSG261 – Health and Safety in Motor Repair and Associated Industries, as well as specific Industry Guidance (INDG), Approved Codes of Practice (ACOP) and Regulations relevant to the industry.

This course will provide you with information, instruction and training about the correct procedures you must follow to protect your personal safety and the safety of others that may be affected by your activities when working at Customer Sites.

This e-learning module will cover:

  • Hazards Present at Customer Sites – This section highlights the hazards that staff are exposed to whilst carrying out work at Customer Sites and H&S legislation that applies.
  • Preparations at Depot and Customer Sites – This covers employee responsibilities for preparing to work at Customer Sites.
  • Risk Assessments, Method Statements (RAMS) & Permits To Work (PTW) – This section covers how tasks should be conducted and precautions to follow.
  • Lone Working Arrangements – This section explains the steps to protect Lone Workers
  • Dynamic Risk Assessments – This section covers the considerations to have when carrying out Dynamic Risk Assessments.

Learning Outcomes

  • You will gain an awareness of the hazards you will face when working at Customer Sites.
  • You will understand the importance of preparing for working at Customer Sites and what measures should be in place including equipment checks and what documentation to take.
  • You will be aware of the precautions that must be in place and how tasks should be carried out whilst at a Customer Sites. This will include an example of tasks that should not be carried out.
  • You will gain an understanding of Dynamic Risk Assessments and the considerations you should have to ensure that health and safety is maintained throughout the duration of the task you are carrying out.

Course Completion

Once you have completed the lesson, you will be issued with a certificate.

The certificate will be issued by Inspire International UK Ltd, the UK’s leading health and safety management company focusing on vehicle workshop safety.

The certificate will clearly show your name; your company name and name of the course taken.

Corrective Action Report

Approximate length:

20 Minutes

Which job roles is this information for:

This training is for all Depot Managers.

About this course:

The purpose of the Corrective Action Report (CAR) procedure is to ensure that the cause(s) of the Non-Conformity is/are identified and a formal process is applied.

This process ensures that the problem is investigated, the root cause(s) identified and corrective action is planned and implemented to rectify the Non Conformity and prevent it from happening again.

This e-learning module will cover:

  • What is a Corrective Action Report?
  • What is Root Cause Analysis & Corrective Action?
  • How to complete a Corrective Action Report?

Learning Outcomes

  • This training is to provide delegates with the information needed to complete a Corrective Action Report used to combat and rectify the Non-Conformities highlighted during site audits.

Course Completion

Once you have completed the lesson, you will be issued with a certificate.

The certificate will be issued by Inspire International UK Ltd, the UK’s leading health and safety management company focusing on vehicle workshop safety.

The certificate will clearly show your name; your company name and name of the course taken.

Equal Opportunities Policy

Approximate length:

30 Minutes

Which job roles is this course for:

This course is for all Keltruck staff.

About this course:

This course is designed to provide delegates with a greater understanding of the benefits and importance of diversity in the workplace. 

This e-learning module will cover:

  • Details of the Policy
  • Formal investigations, actions and appeals
  • Types of discrimination
  • Recruitment, promotion, training and other selection procedures
  • Anti-harassment and bullying
  • Complaints procedures

Learning Outcomes

This course will provide delegates with knowledge of commitment to equal opportunities and the potential consequences of workplace discrimination. You will learn how to manage diversity at all levels, for the benefit of your yourself, your colleagues, the wider workforce, and organisation as a whole. 

Course Completion

At then end of this course you will be required to complete a multiple choice assessment based on the information provided and what you have learned.

Delegates will need to pass the assessment within this course to ensure successful completion. The pass mark is 70%.

You will have a maximum of 3 attempts to reach the required pass mark. You can revisit the course content if you need to before attempting the assessment again.

Once the assessment has been passed, you will be issued with a certificate.

The certificate will be issued by Inspire International UK Ltd, the UK’s leading health and safety management company focusing on vehicle workshop safety. The certificate will clearly show your name; your company name; name of course taken; pass percentage; expiry date and any applicable course accreditation marks.

SAFETY ALERT: Working under a tilted cab…

About this course:

URGENT Safety Alert: Working under a tilted cab on vehicles with a low roof height

This e-learning module will cover:

  • Working under a tilted cab on vehicles with a low roof height
  • Chassis List – Low Cab Roof Mechanical Suspension

Learning Outcomes

  • This notice is to provide delegates with important information to enable them to work safely under a tilted cab on vehicles with a low roof height.

Course Completion Once you have completed the lesson, you will be issued with a certificate. The certificate will be issued by Inspire International UK Ltd, the UK’s leading health and safety management company focusing on vehicle workshop safety. The certificate will clearly show your name; your company name and name of the course taken.

The Safe Use of Oxy Fuel Gas Equipment

Approximate Length:

2 Hours – 30 Minutes

Which job roles is this course for:

This course is for any staff that use Oxy-Fuel Gas Equipment

About this course:

Anyone using Oxy-Fuel Gas Equipment has health and safety responsibilities, both for their safety and anyone else that could be affected by their activities. Staff that are required to use Oxy-Fuel Gas Equipment must receive adequate training. They must be aware of the Hazards and Risks associated to the use of the equipment and the control measures in place to help keep them and others safe.

This e-learning module will cover:

  • Code of practice CP7 Revision 8 2018 – British Compressed Gas Association to comply with The Acetylene Safety (England, Wales and Scotland) Regulations 2014 (ASR 2014)
  • HSE guidance INDG327 Working safely with acetylene (Included as handout)
  • Hazard and risk assessment using oxygen acetylene equipment
  • Maintenance of equipment (PUWER Regulation 5).

Learning Outcomes

  • This course is to provide delegates with suitable training in the safe use of Oxy Fuel (acetylene & propane) Gas Equipment.

Course Completion

At then end of this course you will be required to complete a multiple choice assessment based on the information provided and what you have learned.

Delegates will need to pass the assessment within this course to ensure successful completion. The pass mark is 70%.

You will have a maximum of 3 attempts to reach the required pass mark. You can revisit the course content if you need to before attempting the assessment again.

Once the assessment has been passed, you will be issued with a certificate.

The certificate will be issued by Inspire International UK Ltd, the UK’s leading health and safety management company focusing on vehicle workshop safety. The certificate will clearly show your name; your company name; name of course taken; pass percentage; expiry date and any applicable course accreditation marks.

Contractor Control

Approximate length:

1 Hour

Which job roles is this course for:

This course is for all job roles within a vehicle workshop who may have interaction with any contractors coming on to site.

About this course:

Anyone engaging contractors has health and safety responsibilities, both for the contractors and anyone else that could be affected by their activities.

Everyone should understand the part they need to play in ensuring health and safety.

Use of contractors in itself does not result in poor health and safety standards, but poor management can lead to injuries, ill health, additional costs and delays.

Contractors may be at particular risk – they may be strangers to your workplace and therefore unfamiliar with your organisation’s procedures, rules, hazards and risks.

This e-learning module will cover:

  • The hazards and risks associated to the different types of contractors on our sites
  • Staff Responsibilities for engaging with Contractors
  • Permits To Work
  • Responsible Persons Responsibilities

Learning Outcomes

  • You will gain an understanding of what the hazards and risks associated to contractors working at your site.
  • You will understand what control measures are required to help improve the safety of anyone affected by the contractors work, including the contractor themselves.
  • You will learn the roles and responsibilities of staff that engage with contractors.
  • You will gain an understanding of Permits To Work.

Course Completion

At then end of this course you will be required to complete a multiple choice assessment based on the information provided and what you have learned.

Delegates will need to pass the assessment within this course to ensure successful completion. The pass mark is 80%

You will have a maximum of 3 attempts to reach the required pass mark. You can revisit the course content if you need to before attempting the assessment again.

Once the assessment has been passed, you will be issued with a certificate.

The certificate will be issued by Inspire International UK Ltd, the UK’s leading health and safety management company focusing on vehicle workshop safety. The certificate will clearly show your name; your company name; name of course taken; pass percentage; expiry date and any applicable course accreditation marks.

Banksman

Banksman

Approximate length:

25 Minutes

 

Which job roles is this course for:

This course is for all job roles within a vehicle workshop,

About this course:

Every year, there are over 5000 accidents involving transport in the workplace. About 50 of these result in people being killed (www.hse.gov.uk/statistics). This lesson looks at the general duties and requirements of a Banksman to ensure the safety of employees or anyone else effected by vehicle manoeuvres conduct at your site. The training also covers the key roles and responsibilities of a Banksman.

This e-learning module will cover:

  • The hazards and risks associated to vehicle manoeuvres
  • Workplace transport safety requirements & Control Measures
  • Banksman Responsibilities
  • Communication Methods.

Learning Outcomes

  • You will gain an understanding of what the hazards and risks associated to vehicle manoeuvres are.
  • You will understand what control measures are required to help improve workplace transport safety.
  • You will learn the roles and responsibilities of a Banksman and why they are important in assisting with safe manoeuvring of vehicles.
  • You will gain an understanding of the communication methods used by a Banksman.

Course Completion

At then end of this course you will be required to complete a multiple choice assessment based on the information provided and what you have learned.

Delegates will need to pass the assessment within this course to ensure successful completion. The pass mark is 80%

You will have a maximum of 3 attempts to reach the required pass mark. You can revisit the course content if you need to before attempting the assessment again.

Once the assessment has been passed, you will be issued with a certificate.

The certificate will be issued by Inspire International UK Ltd, the UK’s leading health and safety management company focusing on vehicle workshop safety. The certificate will clearly show your name; your company name; name of course taken; pass percentage; expiry date and any applicable course accreditation marks.

Cab Tilting – Scania

Cab Tilt

Approximate length:

20 Minutes

Cab Tilting – Scania

Which job roles is this course for:

This course is for all technicians and all staff that may be involved in conducting Cab Tilting,

About this course:

Working beneath a raised Cab is often required to check for faults, servicing and repairs etc.

Because these tasks are so common people get used to working under potentially lethal weights. Unfortunately, serious and fatal accidents happen every year even though the dangers and precautions are well known.

You must always understand the procedure you need to follow, use the right equipment for the job and never be tempted to take short cuts or use inappropriate equipment.

This training gives employees an insight into the Cab Tilting process. It will give employees an understanding of control measures and procedures to follow to protect themselves and others when carrying out the Cab Tilt process.

This e-learning module will cover:

  • Cab Tilting Requirements – This gives an insight in to the requirements and measures to have in place to conduct the Cab Tilting process safely.
  • Cab Tilting Safe System of Work – This looks at a step by step process in conducting the Cab Tilting safely.

Learning Outcomes

  • You will gain an understanding of the importance of safety measures that must be in place before carrying out Cab Tilting
  • You will understand what precautions and control measures you should put in place to protect you and others when conducting Cab Tilting

Course Completion

At then end of this course you will be required to complete a multiple choice assessment based on the information provided and what you have learned.

You will need to pass the assessment within this course to ensure successful completion. The pass mark is 80% You will have a maximum of 3 attempts to reach the required pass mark.

You can revisit the course content if you need to before attempting the assessment again.

Once the assessment has been passed, you will be issued with a certificate. The certificate will be issued by Inspire International UK Ltd, the UK’s leading health and safety management company focusing on vehicle workshop safety.

The certificate will clearly show your name; your company name; name of course taken; pass percentage; expiry date and any applicable course accreditation marks.